Appendix J - Keyword List C

In order to review the section material, it is necessary to open the applicable section of Volume I. To find the word in the list either scroll down or use the Edit-Find feature (Ctrl-F for PC users).

Transfer to other lists by clicking on the following links:

Lists: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |

C

Cabin atmosphere

5.1.2.1.4.2 Thermal Factors Design Considerations

Cabin pressure

4.3.2.2 Noise Design Considerations

5.1.2 Atmosphere Design Considerations

Cabinets

11.3.2 Drawer and Rack Design Considerations

12.3.1.2 Physical Accessibility Design Requirements

Cable identification

11.14.4 Example Cable Management Design Solutions

Cable location

11.14.3 Cable Management Design Requirements

Cable maintenance

11.14.2 Cable Management Design Considerations

Cable management

11.14 Cable management

11.14.3 Cable Management Design Requirements

Cable marking

11.14.4 Example Cable Management Design Solutions

Cable protection

11.14.3 Cable Management Design Requirements

Cable retention

11.14.3 Cable Management Design Requirements

Cable routing

11.14.3 Cable Management Design Requirements

Cables

11.10.3.2 Electrical Connectors Design Requirements

11.10.3.5 Connector Identification/Alignment Design Requirements

11.14.2 Cable Management Design Considerations

12.3.1.2 Physical Accessibility Design Requirements

Cadmium plated fasteners

11.9.3.4 IVA Fastener Design Requirements

Calcium loss

5.2.2.1 Physiological Effects of Microgravity

Calibration

12.3.2.1 Fault Detection and Isolation Design Requirements

Capture receptacle

11.5.3.1 General Mounting Design Requirements

Carbon dioxide

5.1.2.2.1.4 Chronic CO₂ Toxicity Design Considerations

Carbon dioxide toxicity

5.1.2.2.1.4 Chronic CO₂ Toxicity Design Considerations

5.1.2.2.1.5 Acute CO₂ Toxicity Design Considerations

5.1.2.2.1.6 CO₂ Withdrawal Design Considerations

Carbon dioxide withdrawal

5.1.2.2.1.6 CO₂ Withdrawal Design Considerations

Carbon monoxide

5.1.2.2.1.7.3 Toxic Gaseous Contaminants Design Considerations

Cardiovascular

10.8.3.1 Microgravity Countermeasures Equipment/Supplies Design Requirements

Caution alarm

9.4.4.3.1 Alarm Classification Design Requirements

Caution and warning

6.6.3.3 Warning System Requirements

Caution and warning displays

9.4.4 Caution and Warning Displays

Caution and warning signals

9.4.4.3.2 General Caution and Warning System Design Requirements

Caution and warning system design factors

9.4.4.2 Caution and Warning System Design Considerations

Caution and warning systems

9.4.4.3.2 General Caution and Warning System Design Requirements

Caution marking location

9.5.3.1.13 Caution and Warning Labels Design Requirements

Center of mass

3.3.7.3.2.2 Body Segments Center of Mass Data Design Requirements

Central storage

10.12.2 Stowage Facility Design Considerations

Chamfers

11.11.3.2.1 Material

Character height

9.5.3.1.14.6 Character Height Design Requirements

Character measurement

9.5.3.1.14.9 Character Measurement Design Requirements

Character size

9.4.2.2 Visual Display Design Considerations

9.5.3.1.14.6 Character Height Design Requirements

Character spaces

9.4.2.3.3.9 Visual Display Terminal (VDT) Design Requirements

9.5.3.1.14.10 Spacing Design Requirements

9.6.2.4.4.2 Design Requirements for Functional Area Tables

Character width

9.5.3.1.14.7 Character Width Design Requirements

9.6.2.4.2 Design Requirements for Tables

Characters

9.4.2.3.3.7 Digital Display Design Requirements

9.4.2.3.3.9 Visual Display Terminal (VDT) Design Requirements

9.5.3.1.14.1 Font Style Design Requirements

9.5.3.1.14.6 Character Height Design Requirements

9.5.3.1.14.7 Character Width Design Requirements

Charts

9.6.2.5.1 Design Considerations for Graphics

Chassis

12.3.1.2 Physical Accessibility Design Requirements

Chassis leakage current

6.4.3.18.1 Chassis Leakage Current

6.4.3.18.1.1 Chassis Leakage Current-Nonpatient Equipment

6.4.3.18.1.2 Chassis Leakage Current-Patient Equipment

Checklists

13.3.3.1 General Inventory Control Design Requirements

Chemical contaminant monitoring

7.2.7.3.3 Environmental Monitoring Design Requirements

Chemical contamination

5.1.3.3 Atmosphere Toxicological Monitoring & Control Design Requirements

Chemical radiation protectors

5.7.2.1.4.3 Chemical Protectors

Chilling

10.5.3.2 Food Selection Preparation Consumption-Design Requirements

Chokes

5.1.2.2.1.7.1 Evolved Gas Dysbarism Design Considerations

Circuit breaker dimensions

9.3.3.3.13 Circuit Breaker Design Requirements

Circuit breaker displacement

9.3.3.3.13 Circuit Breaker Design Requirements

Circuit breaker protection

9.3.3.2 Accidental Actuation Design Requirements

Circuit breaker resistance

9.3.3.3.13 Circuit Breaker Design Requirements

Circuit breakers

9.3.3.3.13 Circuit Breaker Design Requirements

12.3.1.2 Physical Accessibility Design Requirements

Circuit tests

9.4.3.3.1 General Design Requirements

Circular scale

9.4.2.3.3.4 Scales and Pointers Design Requirements

Circumference

3.2.3.1 Microgravity Effects Design Considerations

Clamps

11.14.3 Cable Management Design Requirements

Class 1 alarm

9.4.4.3.1.1 Emergency Display Design Requirements

Class 2 alarm

9.4.4.3.1.2 Warning Signal Design Requirements

Class 3 alarm

9.4.4.3.1.3 Caution Display Design Requirements

Cleaning

8.12.3.4 Decor Cleaning and Maintenance

9.2.5.1.2 Window Workstation Design Requirements

10.2.2 Personal Hygiene Design Considerations

10.5.3.4 Galley and Wardroom Cleaning - Design Requirements

10.9.3.1 Medical Communications/Computing Design Requirements

Cleaning chemicals

13.2.3.2 Surface Cleaning Design Requirements

Cleaning implements

13.2.3.2 Surface Cleaning Design Requirements

Cleanser

13.2.4 Example Housekeeping Design Solutions

Cleansing

10.3.3.1 Defecation and Urination Facilities Design Requirements

Cleansing agents

10.2.3.2 Whole Body Cleansing Design Requirements

10.2.3.5 Grooming and Shaving Design Requirements

Cleanup supplies

10.3.4 Example Body Waste Management Facility Design

Clinical laboratory lighting

8.13.3.5 Medical Lighting Requirements

Clips

11.7.3.4 Example Equipment Restraint Design Solutions

Clock

9.4.2.3.3.5 Clock and Timer Design Requirements

Close window

9.6.3.1.7.5.2 Design Requirements for Interactions with Windows

Closures

11.4 Closures and Covers

13.2.3.1 General Housekeeping Design Requirements

Clothing

3.2.2 Application of Anthropometric Data - Design Considerations

3.3.3.2.5 Clothing Design Considerations

5.8.2 Thermal Environment Design Considerations

7.2.5.3.5 Personal Clothing & Equipment Cleansing Design Requirements

10.4.3 Individual Crew Quarters Design Requirements

10.10.2 Laundry Facility Design Considerations

11.13 Crew Personal Equipment

3.3.1.2 Body Size Design Considerations

Clothing comfort

11.13.1.3.1 General Clothing Design Requirements

Clothing considerations

11.13.1.2.1 Preliminary Clothing Design Considerations

Clothing design

11.13.1.2 Clothing Design Considerations

11.13.1.3 Clothing Design Requirements

11.13.1.4 Example Clothing Design Solutions

Clothing doffing

11.13.1.3.1 General Clothing Design Requirements

11.13.1.3.1 General Clothing Design Requirements

Clothing environmental protection

11.13.1.3.1 General Clothing Design Requirements

Clothing esthetics

11.13.1.3.1 General Clothing Design Requirements

Clothing identification

11.13.1.3.2 Clothing Packaging and Storage Design Requirements

Clothing material

11.13.1.3.1 General Clothing Design Requirements

Clothing packaging

11.13.1.3.2 Clothing Packaging and Storage Design Requirements

Clothing quantities

11.13.1.2.3 Frequency of Clothing Change

Clothing selection

11.13.1.3.1 General Clothing Design Requirements

Clothing sizes

11.13.1.3.1 General Clothing Design Requirements

Clothing storage

11.13.1.3.2 Clothing Packaging and Storage Design Requirements

Clothing use rates

11.13.1.2.3 Frequency of Clothing Change

Coarse control

9.2.3.2.9 Control/Display Movement Ratio Design Requirements

Code brightness

9.5.3.2 Coding Design Requirements

Code color

9.5.3.2 Coding Design Requirements

Code location

9.5.3.2 Coding Design Requirements

Code pattern

9.5.3.2 Coding Design Requirements

Code shape

9.5.3.2 Coding Design Requirements

Code size

9.5.3.2 Coding Design Requirements

Coding

9.3.3.3.2 Thumbwheel Control Design Requirements

9.3.3.3.6 Lever Design Requirements

9.5 Labeling and Coding

9.5.3.2 Coding Design Requirements

9.6.2.6 Coding

9.6.3.1.6.2 Design Requirements for Menus

9.6.4.3 Design Requirements for Data Entry Design

10.12.3 Stowage Facility Design Requirements

11.2.3.5 Tool Labeling and Identification Design Requirements

11.5.3.2 Alignment Devices Design Requirements

11.8.2.2.2 Handhold and Handrail Coding Design Requirements

11.10.3.5 Connector Identification/Alignment Design Requirements

11.14.3 Cable Management Design Requirements

Coding applications

9.5.2 Labeling and Coding Design Considerations

Coding use

9.5.2 Labeling and Coding Design Considerations

Cold tolerance times

5.8.2.2.4 Human Performance in Cold - Design Considerations

Coliforms

7.2.7.2.2.2 Microbiological Monitoring Design Considerations

Color

8.6.2.2 Visual Design Considerations

8.12.2.1 General Interior Decor Design Considerations

8.12.2.2 Decorative Technique Design Considerations

8.12.2.3 Psychological Effects Design Considerations

8.12.3.3 Color Selection

8.13.3.3 Light Color Design Requirements

9.2.2.2.4 Workstation Color Design Requirements

9.2.5.1.2 Window Workstation Design Requirements

9.4.2.3.3.9 Visual Display Terminal (VDT) Design Requirements

Color coding

8.5.3.3 Location & Orientation By Color Coding Design Requirements

9.4.2.3.3.4 Scales and Pointers Design Requirements

9.4.2.3.3.8 Light Emitting Diode (LED) Design Requirements

9.5.3.1.5 Alignment Marks/Interface Identification Design Requirements

9.5.3.2 Coding Design Requirements

Color rendition

8.13.3.3 Light Color Design Requirements

Color temperature

8.13.3.3 Light Color Design Requirements

Columns

9.6.2.4.3.2 Design Requirements for Matrix Tables

Combined stressors

5.9.2 Combined Environmental Effects Design Considerations

Comfort

13.2.2 Housekeeping Design Considerations

Command area

9.6.3.1.3.2 Design Requirements for Command Language

Command keystrokes

9.6.3.1.4 Design Requirements for Command Keystrokes

Command language

9.6.3.1.3 Command Language

9.6.3.4.5.1 Design Considerations for Prompts

Command language syntax

9.6.3.1.3.2 Design Requirements for Command Language

Command language terms

9.6.3.1.3.2 Design Requirements for Command Language

Command language use

9.6.3.1.3.2 Design Requirements for Command Language

Command listings

9.6.3.1.10.2 Design Requirements for User-definable Macros

Commands

9.6.2.1 Design Considerations for Data Display

9.6.3.1.3.2 Design Requirements for Command Language

9.6.3.4.2.1 Design Considerations for User Feedback

Common tools

11.2.3.2 Tool Commonality Design Requirements

Communication

4.3.2.2 Noise Design Considerations

9.2.5.2.1 Maintenance Workstation Design Considerations

10.4.3 Individual Crew Quarters Design Requirements

10.6.2 Meeting Facility Design Considerations

10.9.3.2.1 Data Base and Communications Capability

Communication equipment

9.4.3.3.3 Operator Comfort and Convenience Design Requirements

Compartment orientation

8.4 Compartment and Crew Station Orientation

Compression monitoring

5.1.3.3 Atmosphere Toxicological Monitoring & Control Design Requirements

Compression therapy

10.9.3.2.11 Hyperbaric Treatment Facilities

Computer access

9.2.5.2.1 Maintenance Workstation Design Considerations

Computer access device

9.3.3.4.8 Bar Code Reader Design Requirement

Computer failure

9.6.4.2 Design Requirements for User Input

Computer input devices

9.3.2.2 Computer Input Devices - Design Considerations

Conduction

5.8.2.2.1 Modes of Heat Exchange - Design Considerations

Conductors

6.4.3.8 Insulation Requirements

Confirmation

9.6.3.4.2.2 Design Requirements for User Feedback

Confirmation request

9.6.3.4.2.1 Design Considerations for User Feedback

Connector actuation force

14.6.4.3 EVA Connectors Design Requirements

Connector alignment

11.10.3.3 Structural Connectors Design Requirements

14.6.4.3 EVA Connectors Design Requirements

Connector arrangement

11.10.3.6 Connector Arrangement Design Requirements

Connector caps

14.6.4.3 EVA Connectors Design Requirements

Connector clearance

14.6.4.3 EVA Connectors Design Requirements

Connector coding

11.10.4 Example Connector Design Solutions

Connector replacement

11.10.3 Connector Design Requirements

Connector shape

11.10.3.5 Connector Identification/Alignment Design Requirements

Connector spacing

14.6.4.3 EVA Connectors Design Requirements

Connectors

6.4.3.7 Plugs and Receptacles Requirements

11.3.3.4 Equipment Drawer Design Requirements

11.10 Connectors

12.3.1.1 General Maintainability Design Requirements

12.3.2.2 Test Point Design Requirements

Consistent terminology

9.6.3.4.1 Design Requirements for Consistent Terminology

Consoles

9.2.2.2.4 Workstation Color Design Requirements

Container locations

9.5.3.1.9 Stowage Container Labeling Design Requirements

Containers

9.5.3.1.9 Stowage Container Labeling Design Requirements

11.8.3.2 Equipment Mobility Aid Design Requirements

Contaminants

5.1.2.2 Dangers Associated with Unsafe Atmospheres Design Considerations

5.1.2.2.1.7.3 Toxic Gaseous Contaminants Design Considerations

5.1.2.3.1 Atmosphere Toxicological Monitoring Design Considerations

7.2.3.3.2 Exercise Countermeasures Design Considerations

8.2.2.2 Multipurpose Use of Volume - Design Considerations

8.3.2.1 General Adjacency Design Considerations

10.9.3.2.2 Environmental Monitoring Equipment

11.11.2.3 Physical Protection Design Considerations

11.12.2 Packaging Design Considerations

Contamination

9.2.5.2.2 Maintenance Workstation Design Requirements

10.10.3 Laundry Facility Design Requirements

10.11.3 Trash Management Facility Design Requirements

11.9.3.4 IVA Fastener Design Requirements

14.2.3.7 EVA Body Waste Management Design Requirements

Contamination prevention

11.11.2.3 Physical Protection Design Considerations

Contingency labels

9.5.3.1.11 Contingency Labels and Marking Devices Design Requirements

Contingency system

10.3.3.1 Defecation and Urination Facilities Design Requirements

Continuous noise

5.4.2.1.2 On-Orbit Phase Acoustic Environment

5.4.2.4.1.1.1 Wide-Band Long-Term Hearing Conservation Considerations

5.4.3.2.3.1 Wide-Band Long-Term Annoyance Noise Exposure Requirements

5.4.3.2.3.2 Narrow-Band Annoyance Noise Exposure Requirements

Continuous type thumbwheel

9.3.3.3.2 Thumbwheel Control Design Requirements

Contrast

4.2.2 Vision - Design Considerations

Control buttons

9.5.3.1.13 Caution and Warning Labels Design Requirements

Control location

9.3.3.2 Accidental Actuation Design Requirements

Control modes

9.4.2.3.3.5 Clock and Timer Design Requirements

Control operation

9.2.3.2.10 Control/Display Complexity and Precision Design Requirements

Control placement

9.2.3.2.4 Preferred Control/Display Location Design Requirements

9.2.5.1.2 Window Workstation Design Requirements

Control protection

9.3.3.2 Accidental Actuation Design Requirements

Control ratios

9.6.4.1 Design Considerations for User Input

Control spacing

9.2.3.2.1 Control Spacing Design Requirements

Control standardization

9.3.3.1 General Requirements

Control types

9.3.3.3 Control Types Design Requirements

Control uses

9.3.2.1 Input Devices Design Considerations

Control/display complexity

9.2.3.2.10 Control/Display Complexity and Precision Design Requirements

Control/display grouping

9.2.3.2.3 Control/Display Grouping Design Requirements

Control/display integration

9.2.3 Control/Display Placement and Integration

Control/display labels

9.2.3.2.8 Control/Display Movement Compatibility Design Requirements

Control/display location

9.2.3.2.4 Preferred Control/Display Location Design Requirements

Control/display maintenance

9.2.3.2.6 Maintenance Controls/Displays Design Requirements

Control/display movement compatibility

9.2.3.2.8 Control/Display Movement Compatibility Design Requirements

Control/display movement ratio

9.2.3.2.9 Control/Display Movement Ratio Design Requirements

Control/display placement

9.2.3 Control/Display Placement and Integration

Control/display relationship

9.2.3.2.4 Preferred Control/Display Location Design Requirements

Controls

6.3.3.8 Levers Cranks Hooks and Controls Requirements

9.2.2.2.4 Workstation Color Design Requirements

9.3 Controls

9.3.3 Control Design Requirements

9.3.4 Examples Control Design Solutions

9.5.3.1.12 Grouped Controls and Displays Design Requirements

11.2.3.1.1 Tool Handgrip Size and Shape Design Requirements

Convection

5.8.2.2.1 Modes of Heat Exchange - Design Considerations

5.8.2.2.2.1 Microgravity Effects on the Thermal Environment

Cooling

10.8.2 Microgravity Countermeasure Facility Design Considerations

10.8.3.4 Exercise Environment Design Requirements

Copier

13.4.3.2 Hardcopy Information Management Design Requirements

Copying data

9.6.3.3.1.2 Design Requirements for Editing

Core temperature

5.8.2.2.4 Human Performance in Cold - Design Considerations

Corners

6.3.3.2 Exposed Corner Requirements

Corrective maintenance

12.2 Design for Maintainability - Design Considerations

Cotter keys

11.9.3.4 IVA Fastener Design Requirements

Counter

9.2.3.2.9 Control/Display Movement Ratio Design Requirements

Counteracting forces

8.9.2.2 Considerations for Location of IVA Personnel Restraints

Countermeasure monitoring

10.8.3.1.2.2 Additional Capabilities

10.8.3.3 Microgravity Countermeasures Program Administration Design Requirements

12.8.3.4 Countermeasures Monitoring Design Requirements

Countermeasure protocol

10.8.3.3 Microgravity Countermeasures Program Administration Design Requirements

10.8.3.3 Microgravity Countermeasures Program Administration Design Requirements

Countermeasure schedules

10.8.3.5 Display Capabilities for Exercising Crewmembers Design Requirements

Countermeasures

10.8.2 Microgravity Countermeasure Facility Design Considerations

Counters

9.4.2.3.3.7 Digital Display Design Requirements

Cover clearance

11.4.3 Closures and Covers Design Requirements

Covers

6.3.3.5 Latches Requirements

9.3.3.2 Accidental Actuation Design Requirements

11.4 Closures and Covers

11.5.3.1 General Mounting Design Requirements

12.3.1.2 Physical Accessibility Design Requirements Cracks

13.2.3.1 General Housekeeping Design Requirements

Crank grip handle

9.3.3.3.4 Crank Design Requirements

Cranks

6.3.3.8 Levers Cranks Hooks and Controls Requirements

9.3.3.3.4 Crank Design Requirements

Crevices

13.2.3.1 General Housekeeping Design Requirements

Crew comfort

5.8.2 Thermal Environment Design Considerations

5.8.2.1 Mission Thermal Environment Design Considerations

5.8.2.2 Human Responses to Thermal Environments - Design Considerations

5.8.2.2.5 Special Ventilation & Metabolic Heat Removal Design Considerations

10.2.2 Personal Hygiene Design Considerations

10.5.3.1 Overall Galley and Wardroom Layout - Design Requirements

11.7.2.3.1 General Personnel Restraints Design Requirements

11.7.2.3.2.1 General Foot Restraint Design Requirements

Crew functions

8.3.2.2 Specific Adjacency Design Considerations

Crew quarter functions

10.4.2 Individual Crew Quarters Design Considerations

Crew quarter size

10.4.3 Individual Crew Quarters Design Requirements

Crew quarters

8.6.2.4 Social Design Considerations

10.4 Crew quarters

Crew station accessibility

8.2.3.1 Crew Station Arrangement and Grouping Design Requirements

Crew station activities

8.2.3.2 Dedicated vs. Multipurpose Space Utilization Design Requirements

Crew station adjacencies

8.3 Crew station adjacencies

Crew station escape

8.7.3.4 Emergency and Escape Route Design Requirements

Crew station location

8.2.3.3 Crew Station Location

Crew station orientation

8.4 Compartment and Crew Station Orientation

Crew station size

8.2.3.1 Crew Station Arrangement and Grouping Design Requirements

Crew station volume

8.6.3.1 Crew Station Body Envelopes Design Requirements

Crewmember orientation

8.8.3.2 Clearances Design Requirements

Crewmember size

10.5.3.1 Overall Galley and Wardroom Layout - Design Requirements

Critical commands

9.6.3.1.2 Design Requirements for User-Computer Dialogues

Critical verbal alarms

9.4.4.3.4.3 Verbal Alarm Signal Design Requirements

Cross contamination

5.1.2.3.2 Atmosphere Microbiological Monitoring Design Considerations

5.1.3.4.3 Cross Contamination Design Requirements

10.2.3.3 Oral Hygiene Design Requirements

10.3.2 Body Waste Management Facilities Design Considerations

Cross references

13.3.3.1 General Inventory Control Design Requirements

Current

6.4.3.18.2 Crewmember Applied Current Requirements

Current limits

6.4.3.18.2 Crewmember Applied Current Requirements

Cursor

9.6.3.1.8.2 Design Requirements for Data Forms/Form Filling

9.6.3.2 Design Requirements for Movement Within User Interfaces

9.6.3.2.1 Design Requirements for Position Designation (Cursor)

9.6.4.1 Design Considerations for User Input

Cursor fine positioning

9.6.3.2.1.1 Design Requirements for Pointing Cursor

Cutting data

9.6.3.3.1.2 Design Requirements for Editing