Appendix J - Keyword List T
In order to review the section material, it is necessary to open the applicable
section of Volume I. To
find the word in the list either scroll down or use the Edit-Find feature
(Ctrl-F for PC users).
Transfer to other lists by clicking on the following links:
Lists: 
| A
| B
| C
| D
| E
| F
| G
| H
| I
| J
| K
| L
| M
| N
| O
| P
| Q
| R
| S
| T
| U
| V
| W
| X
| Y
| Z
|
T
Table
10.5.3.2 Food Selection Preparation Consumption Design Requirements
10.6.4 Example Facility Design Solution
Table organization
9.6.2.4.3.2 Design Requirements for Matrix Tables
Table readability
9.6.2.4.3.2 Design Requirements for Matrix Tables
Tables
9.6.2.4 Tables
9.6.2.4.1 Design Considerations for Tables
Tabs
9.6.3.2.1 Design Requirements for Position Designation (Cursor)
Target size
9.4.2.3.3.9 Visual Display Terminal (VDT) Design Requirements
Task
9.6.2.1 Design Considerations for Data Display
Task analysis
9.2.2.1.1 Human/Machine Task Division Design Considerations
Task division
9.2.2.1.1 Human/Machine Task Division Design Considerations
Taste
4.4. Olfaction and Taste
4.4.2.2 Taste
Telemetry
13.3.3.1 General Inventory Control Design Requirements
Temperature
6.7.4 Short Duration Exposure
8.12.2.3 Psychological Effects Design Considerations
10.6.2 Meeting Facility Design Considerations
Tempered window panes
11.11.3.1.3 Optical Characteristics
Temporary equipment restraints
11.7.3.2 Equipment Restraint Design Considerations
Temporary restraints
11.7.3.3 Equipment Restraint Design Requirements
Temporary stowage bags
11.7.3.4 Example Equipment Restraint Design Solutions
Tension loads
11.7.2.3.2.3 Foot Restraint Loads Design Requirements
Terminology
9.6.3.4.1 Design Requirements for Consistent Terminology
Test equipment
12.3.1.2 Physical Accessibility Design Requirements
12.3.2.1 Fault Detection and Isolation Design Requirements
Test points
12.3.2.2 Test Point Design Requirements
Testability
12.3.2 Testability Design Requirements
Testing
12.3.2 Testability Design Requirements
Tether attach points
11.7.2.3.3.2 Body Restraint Loads Design Requirements
Tether attachments
11.7.2.3.3.1 Body Restraint Donning/Doffing Design Requirements
11.7.2.3.3.2 Body Restraint Loads Design Requirements
Tethered equipment
9.5.3.1.5 Alignment Marks/Interface Identification Design Requirements
Tethers
11.6.3.1 General Handle and Grasp Area Design Requirements
11.6.3.2 Handle and Grasp Area Location Design Requirements
11.7.2.3.3.4 Body Restraint Dimensional Design Requirements
11.7.3.3 Equipment Restraint Design Requirements
11.7.3.4 Example Equipment Restraint Design Solutions
11.8.3.1 Equipment Mobility Aid Design Considerations
14.1.3 General EVA Safety Design Requirements
Text
9.6.2.3 Text
9.6.3.3.1.1 Design Considerations for Editing
9.6.3.3.1.2 Design Requirements for Editing
Text display
9.6.2.3.2 Design Requirements for Text
Texture
8.12.2.2 Decorative Technique Design Considerations
Thermal conductivity
5.1.2.1.4.2 Thermal Factors Design Considerations
Thermal environment
5.8 Thermal environment
10.7.3 Recreation Facility Design Requirements
Thermal environment control
5.8.3.2 Thermal Monitoring and Control Design Requirements
Thermal environment monitoring
5.8.3.2 Thermal Monitoring and Control Design Requirements
Thermal tolerance
5.8.2.2.3 Human Performance in Heat Design Considerations
Thermoregulation
5.8.2.2.2 Thermoregulation by the Body Design Considerations
5.8.2.2.3 Human Performance in Heat Design Considerations
Threaded fasteners
11.9.2 Fastener Design Considerations
11.9.3.2 Hand-Actuated Fastener Design Requirements
11.9.3.3 Tool-Actuated Fastener Design Requirements
Threads
6.3.3.6 Screws and Bolts Requirements
Throw-away restraints
11.7.3.3 Equipment Restraint Design Requirements
Thumbwheel coding
9.3.3.3.2 Thumbwheel Control Design Requirements
Thumbwheel control
9.3.3.3.2 Thumbwheel Control Design Requirements
Tiled windows
9.6.3.1.7.5.1 Design Considerations for Interactions with Windows
Timer
9.4.2.3.3.5 Clock and Timer Design Requirements
Titles
9.5.3.1.14.4 Titles Design Requirements
9.6.2.4.1 Design Considerations for Tables
9.6.2.4.1 Design Considerations for Tables
9.6.2.4.2 Design Requirements for Tables
9.6.2.8 Design Requirements for Format
Toggle switch operating force
9.3.3.3.7 Toggle Switch Design Requirements
Toggle switch orientation
9.3.3.3.7 Toggle Switch Design Requirements
Toggle switches
9.3.3.3.7 Toggle Switch Design Requirements
Tone
5.4.3.2.3.2 Narrow-Band Annoyance Noise Exposure Requirements
Tool
12.3.1.2 Physical Accessibility Design Requirements
Tool access
11.2.3.6 Tool Access Design Requirements
Tool actuated fasteners
11.9.2 Fastener Design Considerations
11.9.3.1 General Fastener Design Requirements
11.9.3.3 Tool-Actuated Fastener Design Requirements
11.9.3.4 IVA Fastener Design Requirements
Tool actuation force
11.2.3.1.3 Tool Actuation Forces and Direction of Action Design Requirements
Tool caddy
11.2.2 Tool Design Considerations
Tool carriers
11.2.3.3 Tool Tethering/Retention Design Requirements
Tool clearance
11.9.2 Fastener Design Considerations
Tool commonality
11.2.2 Tool Design Considerations
Tool design
11.2.3 Tool Design Requirements
Tool disassembly
11.2.3.3 Tool Tethering/Retention Design Requirements
Tool finish
11.2.3.7 Special Tool Features Design Requirements
Tool handle
11.2.3.1.2 Tool Handedness Design Requirements
Tool handles
11.2.3.6 Tool Access Design Requirements
Tool head
11.2.3.6 Tool Access Design Requirements
Tool identification
11.2.3.5 Tool Labeling and Identification Design Requirements
Tool installation
11.2.3.1.2 Tool Handedness Design Requirements
Tool integration
11.2.3.1 Hand and Tool Integration Design Requirements
Tool inventory
11.2.2 Tool Design Considerations
11.2.3.4 Tool Stowage Design Requirements
Tool kit labels
11.2.3.5 Tool Labeling and Identification Design Requirements
Tool kit stowage
11.2.2 Tool Design Considerations
Tool kits
11.2.2 Tool Design Considerations
11.2.4.1 Example Manual Tools
Tool labels
11.2.3.5 Tool Labeling and Identification Design Requirements
Tool layout
11.2.3.4 Tool Stowage Design Requirements
Tool list
9.5.3.1.8 Operating Instruction Design Requirements
Tool names
11.2.3.5 Tool Labeling and Identification Design Requirements
Tool operation
11.2.3.1.2 Tool Handedness Design Requirements
Tool pouches
11.2.4.1 Example Manual Tools
Tool restraints
11.2.3.3 Tool Tethering/Retention Design Requirements
Tool retention
11.2.3.3 Tool Tethering/Retention Design Requirements
Tool stowage
11.2.3.4 Tool Stowage Design Requirements
11.2.4.1 Example Manual Tools
Tool tethering
11.2.3.3 Tool Tethering/Retention Design Requirements
Tool trays
11.2.4.1 Example Manual Tools
Tool unit standards
11.2.2 Tool Design Considerations
Tool use
11.2.2.2 Body Stabilization When Using Tool Design Considerations
Tools
11.2 Tools
11.2.4 Example Tool Design Solutions
11.5.3.1 General Mounting Design Requirements
11.7.3.3 Equipment Restraint Design Requirements
11.9.2 Fastener Design Considerations
11.9.3.3 Tool-Actuated Fastener Design Requirements
11.10.3.6 Connector Arrangement Design Requirements
12.3.1.1 General Maintainability Design Requirements
13.2.3.2 Surface Cleaning Design Requirements
Toothache
5.1.2.2.1.7.2 Trapped Gas Dysbarism Design Considerations
Torque
4.9.3 Strength Design Requirements
Torquing
11.9.3.3 Tool-Actuated Fastener Design Requirements
Torsion loads
11.7.2.3.2.3 Foot Restraint Loads Design Requirements
Torso restraint
3.3.3.3.1 Functional Reach Design Requirements
11.7.2.3.4 Sleep Restraints Design Requirements
Total visual field
8.11.2.2 Window Configuration Design Considerations
Touch sensitive display
9.3.3.4.7 Touch-Sensitive Display Design Requirements
Touch temperature
6.5 Touch Temperature
11.8.2.2.5 Handhold and Handrail Temperature Design Requirements
Touch-sensitive devices
9.3.2.2 Computer Input Devices Design Considerations
Toxic
5.1.2.1.4.1 Metabolic Factors Design Considerations
6.6.2 Fire Protection and Control Design Considerations
Toxicity
5.1.2.2.1.7.3 Toxic Gaseous Contaminants Design Considerations
10.5.3.3 Food Packaging and Stowage Design Requirements
Toxicological monitoring
5.1.2.3.1 Atmosphere Toxicological Monitoring Design Considerations
Track ball
9.3.3.4.5 Track Ball (Rolling Ball) Design Requirements
9.3.2.2 Computer Input Devices Design Considerations
Traffic
8.3.2.1 General Adjacency Design Considerations
8.7 Traffic Flow
8.11.2.1 Location of Windows Within Space Module Design Consideration
9.2.2.2.2 Congestion and Interference Design Requirements
9.3.3.2 Accidental Actuation Design Requirements
10.5.3.1 Overall Galley and Wardroom Layout Design Requirements
11.3.3.1 Drawer and Rack Interfacing Requirements
Traffic congestion
8.7.3.2 Congestion Avoidance Design Requirements
Traffic flow
8.7.3.1 Overall Traffic Flow Design Requirements
Traffic regulations
8.7.3.4 Emergency and Escape Route Design Requirements
Transfer containers
10.3.3.2 Facilities for Other Waste Products Design Requirements
13.2.3.1 General Housekeeping Design Requirements
Transit time
8.2.3.1 Crew Station Arrangement and Grouping Design Requirements
Transition
8.3.2.2 Specific Adjacency Design Considerations
8.3.3.1 Adjacent Crew Station Design Requirements
Translation path
8.8.2 Translation Path Design Considerations
8.8.3.2 Clearances Design Requirements
8.8.3.3. Translation Path Obstructions and Hazards Design Requirements
8.7.2.1 Optimization of Traffic Flow Design Considerations
8.7.2.3 Equipment Transfer Design Considerations
8.7.3.2 Congestion Avoidance Design Requirements
Translation path marks
8.8.3.4 Marking of Translation Paths Design Requirements
Translation path minimums
8.8.3.1 Minimum Translation Path Dimensions Design Requirements
Translation rates
8.7.2.2 IVA Translation Rates Design Considerations
Transmissivity
11.11.2.1 Optical Characteristics Design Considerations
Transmittance
11.11.3.2.3 Transmittance
Transparent surfaces
9.2.5.2.2 Maintenance Workstation Design Requirements
Transverse vibration
5.5.3.2.1 Severe Discomfort Boundary
5.5.3.2.2 Decreased Proficiency Boundary
5.5.3.2.3 Reduced Comfort Boundary
5.5.3.3.1 Vibration Exposure Limit
5.5.3.3.2 Vibration Exposure Limit
Trapped radiation belts
5.7.2.1.2.1 Trapped Radiation Belts
Trash
10.5.3.4 Galley and Wardroom Cleaning Design Requirements
10.11 Trash Management Facility
11.12.3 Packaging Design Requirements
Trash collection
11.12.3 Packaging Design Requirements
Trash disposal
11.12.3 Packaging Design Requirements
Trash facility
10.11 Trash Management Facility
Trash location
10.11.2 Trash Management Facility Design Considerations
Trash management
10.11.2 Trash Management Facility Design Considerations
Trash receptacles
10.11.2 Trash Management Facility Design Considerations
10.11.3 Trash Management Facility Design Requirements
Trash separation
10.11.2 Trash Management Facility Design Considerations
Trash sorting
10.11.3 Trash Management Facility Design Requirements
Tread lubricants
11.9.2 Fastener Design Considerations
Trend estimation
3.2.3.3 Secular Changes Design Considerations
Troubleshooting
12.3.2.2 Test Point Design Requirements
Truncation
9.6.3.1.3.2 Design Requirements for Command Language
Turbidity
7.2.7.2.2.3 Physical Monitoring Design Considerations
Tutorial display
9.4.5.1.2 Tutorial Display and Annunciation Requirements
Two-hand tasks
8.9.2.2 Considerations for Location of IVA Personnel Restraints
Two-joint movement
3.3.2.2.2 Multi-Joint Versus Single Joint Data Design Considerations
Type
9.5.3.1.14.1 Font Style Design Requirements
